&

PL2210二極管泵浦皮秒Nd：YAG激光器

直接聯系

上海尖豐光電技術有限公司

俄羅斯

產品規格型號

參考報價：

面議

關注度：

321

產品介紹

pl2210系列二極管泵浦皮秒Nd：YAG激光器

產品簡介:

短脈寬、高能量，高達2 kHz的重復率和優良的脈沖穩定性進行pl2210系列二極管泵浦皮秒激光器的許多應用的**，如材料加工、激光光譜學、光學參量發生器泵和其他任務。

產品特點：

高脈沖能量
二極管泵浦固體設計
空氣冷卻，不需要外部供水
交鑰匙工程
維護成本低
可選條紋相機觸發脈沖與< 10的均方根抖動
遙控板
通過USB接口與PC機提供的控制
LabVIEW™ drivers
可選的溫度穩定性，第二，第三，第四諧波發生器

產品應用：

時間分辨熒光，泵浦-探測光譜
OPG/OPA/OPO泵浦
其他光譜和非線性光學中的應用
激光遙感

規格：

型號		PL2210	PL2210A	PL2210B	PL2210B-TR	PL2210C
輸出功率
at 1064 nm	0.4 mJ		0.9 mJ	2.5 mJ	2.5 mJ at 1 kHz 5 W at 88 MHz	2.5 mJ / 5 mJ
at 532 nm²⁾	0.2 mJ		0.45 mJ	1.3 mJ	-	1.3 mJ / 2.5 mJ
at 355 nm³⁾	0.11 mJ		0.3 mJ	0.8 mJ	-	0.8 mJ / 1.3 mJ
at 266 nm⁴⁾	0.05 mJ		0.15 mJ	0.5 mJ	-	0.5 mJ / 0.8 mJ
脈沖能量穩定(Std. Dev)⁵⁾
at 1064 nm	0.5 %
at 532 nm	0.8 %					#colspan#
at 355 nm	1 %
at 266 nm	2.5 %
脈沖持續時間(FWHM) ⁶⁾	25±2 ps		25±2 ps	80±8 ps	100±10 ps	25±2 ps / 80±8 ps
脈寬穩定性 ⁷⁾	±1 ps		±1 ps	±3 ps	±3 ps	±1 ps / ±3 ps
脈沖重復率 ⁸⁾	1 or 2 kHz		1 kHz		1 kHz / 1 MHz	1 kHz
觸發模式	internal/external
典型的同步輸出脈沖延遲^{9) 10)}	-500...50 ns
同步輸出脈沖抖動(Std. Dev)	<0.1 ns rms
空間模式¹¹⁾	TEM₀₀
光束發散角¹²⁾	<1.6 mrad
光斑直徑 ¹³⁾	~3 mm
光束指向穩定性 ¹⁴⁾	<30 μrad
脈沖對比度	>200:1
極化	linear， >100:1
物理特性
Laser head size (W x L x H)， mm ¹⁵⁾	455 x 1035 x 242				455x1235x242 mm
電源尺寸(W x L x H)， mm	365 x392 x 290			475 x 460 x 290		365x285x360 mm
操作要求
冷卻水	沒要求，空氣冷卻
相對濕度	10-80 % (non condensing)
環境溫度	22 ± 2 °C
電源要求	100-240 VAC， single phase， 50/60 Hz
功率消耗 ¹⁶⁾	<0.5 kW		<1 kW	<1 kW	<2 kW	<1.5 kW

1) Due to continuous improvement， all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise， all specifications are measured at 1064 nm.

2) For PL2210x-SH and PL22210x-SH/FH options. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.

3) For PL2210x-TH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.

4) For PL2210x-SH/FH option. Outputs are not simultaneous. Please inquire for pulse energies for other harmonic generator options.

5) Averaged from 300 pulses at 1 kHz pulse repetition rate.

6) Optional 80±8 ps duration.

7) Measured over 1 hour period when ambient temperature variation is less than ±2 °C.

8) Should be specified when ordering. Inquire for custom pulse repetition rates.

9) In respect to optical pulse. <10 ps rms jitter is provided with pretrig option.

10) SYNC OUT lead or delay can be adjusted with 0.25 ns steps in specified range.

11) Gaussian fit >90%.

12) Full angle measured at the 1/e2 point at 1064 nm .

13) Beam diameter is measured at 1064 nm at the 1/e2 point.

14) Rms value measured from 300 shots.

15) 455×1235×250 mm (W×L×H) laser head size might be required for some optional configurations.

16) At 1 kHz pulse repetition rate.

Options

Option PRETRIG provides low jitter pulse for streak camera triggering with lead/delay in -150...150 μs range and <10 ps rms jitter.
Option P80 provides 80±8 ps output pulse duration. Main specifications:

型號	PL2210	PL2210A
脈沖能量¹⁾	0.7 mJ	1.2 mJ
脈沖持續時間(FWHM)	<80 ps

*At 1064 nm

Option PC allows reduction of the pulse repetition rate of the PL2210 series laser by integer numbers. Single shot mode is also possible. In addition， the –PC option reduces the low-intensity quasi-CW background that is present at laser output at 1064 nm wavelength. Please note that the output of fundamental wavelength and harmonics will be reduced by approx. 20% with installation of the –PC option.

光束輪廓

圖1 典型的近pl2210系列激光束剖面

外形圖：

獲取更多信息，請訪上海尖豐光電技術有限公司網站

久久综合久久美利坚中国_中曰韩无码视频_久久97久久97精品免视看_黄网址免费永久在线观看免费