Application Furnaces are used in laboratories for heat-treatment testing of various samples, when the agresive fouling, which would pelt with the spirals, can be formed. Description of the construction of the furnace: - frameless conctruction created by the hooped rustless metal plate, - portal of the door of the fireproof adapting pieces, - in the peep-hole of the door the protective blue glass, - door of the hooped rustless metal plate tank shaped , - thrust is extrapolated by the ductile springs, - muffle insulated by the sedge of the mineral grain and cased by the insulation desks, - door fulfilmed by the insulation desk, - heating spiral winding-up on the muffle, - door equiped by the security limit switch, - feeder cables procurated by the uniphase bolts, - furnace equiped by the cooling fan, - controller HT 40AL enables controlling to standard value, - thermocouple of the type S, placed on the back side Standard equipment of the furnace covers: - controller HT 40AL - manualy door opening up Like an accessories as an extra we are bidding: - controller INDUSTRY - rotary table - interface R 232/485 - exhaust fan - software for the monitoring and the record of the temperature cycle - protective atmospher supply - calibration of the entry of the measuring controller Benefits: - rustless fulfilment - attractive design - draught prevenes the devaporation of the vapours at firing and markedly opprobrious the temperature of the mantle - perfect lay of the temperature - top insulating materials ( low power consumption, possibility of the fast start on the asked temperature ) - programmable temperature adjustment with the high accuracy - solid state relay (more fluent and silent running,the minimum disturbance of the surrounding mechanism ) - perfect workshop processing,the hardware and safety in service
| 應用范圍: 熔爐被用于實驗室不同樣品的熱處理的測試,并能有效的阻止電熱元件在加熱過程中受到腐蝕物質的污染。 結構描述: - 爐殼采用優質花紋不銹鋼制成 - 電爐入口安裝有防火模塊 - 門上安裝觀察孔 - 彈簧助推式上開門 - 門由氧化鋁纖維整體模塊組成 - 電熱絲環繞在馬夫爐膛的四周 - 門上安裝有斷電開關 - 單相的供電電纜 - 電控元件通過電子風扇降溫 - 控制器HT40AL 有2個升溫段,2個恒溫段 - S型熱電偶 標準設計包括: - HT40AL控制器 - 手動的上開門 優點: - 實現不銹 - 吸引人的設計 - 優良的隔熱保溫效果,防止爐外殼水蒸汽凝結 - 頂部絕緣材料( 低功率消耗, 在被要求的溫度上快速開始的可能性) - 可編程的高精確度的溫度控制 - 固態繼電器SSR (流暢和無聲的運轉, 周圍機械裝置的*小干擾) - **的車間操作, 硬件和使用中的安全設備 額外收費附件: - 控制器工業 - 界面R 232/485 - 排氣風扇 - 監控軟件和溫度循環的記錄 - 氣體保護裝置
|