久久综合久久美利坚中国_中曰韩无码视频_久久97久久97精品免视看_黄网址免费永久在线观看免费

粉體行業在線展覽

產品

產品>

分析儀器設備>

半導體行業專用儀器

>半導體專用檢測儀設備COREMA-WT/VT/ER

半導體專用檢測儀設備COREMA-WT/VT/ER

直接聯系

賽倫科技

德國

產品規格型號
參考報價:

面議

關注度:

756

產品介紹

Company Profile

SemiMap Scientific Instruments GmbH develops measurement systems to evaluate electrical properties of semi-insulating compound semiconductor substrates. GaAs, InP, SiC, GaN and CdTe wafers are chearacterized by SemiMap systems with respect to resistivity, mobility and carrier concentration.

The non-destrucive contactless capacitive measurement technique requires no sample preparation and generates full wafer resistivity topograms revealing lateral variations as small as 1% with high lateral resolution.

SemiMap Analytical Systems

Evaluation of electrical material properties

Resistivity r = Q0t (Q¥ee0) -1

Mobility µ = 1/B [ r(B) / r(0) - 1] ½

Activation energy Ea = (kT1T2)/(T2-T1) * ln [r(T1) / r(T2)]

COREMA-WT

Measures susbtrate resistivity. Contactless mapping of wafers up to 200 mm in diameter, 1 mm resolution; resistivity range 1x105 to 1x1012 W-cm; automated measurement routines, statistical analysis.

COREMA-VT

Measures substrate resistivity at variable temperature range from room temperature up to 400 oC; evaluation of carrier activation energy via Arrhenius plot

COREMA-ER

Measures sheet resistance (>105W) of epitaxial buffer layers; calculate layer resistivity for given thickness.

======================================================================================================

COREMA - WT

The COntactless REsistivity MApper designed for Wafer Topography (COREMA - WT) is a high performance diagnostic tool to characterize the resistivity of semi-insulating semiconductor wafers with utmost precision, repeatability and detail. Full wafer resistivity topograms discern fluctuations in the percent range with lateral resolution below 1 mm. It is used for routine production control as well as in-depth analysis supporting material development. Analytic methods to discern and quantify locally inhomogeneous material have been elaborated.

=====================================================================================================

COREMA - RM

The COREMA - RM system determines the full set of electrical transport parameters (Resistivity, carrier Mobility and carrier concentration). It replaces completely the conventional Hall measurements by a contactless procedure which is vastly superior in speed and reproducibility. Data may be taken at any desired spot on wafers up to 200 mm.

Probe diameter 1 mm

Sample diameter 10 mm – 100 mm

Manual loading

Free choice of measurement position

Mobility > 1000 cm2/Vs

ISSUE

CONVENTIONAL HALL

COREMA - RM

Wafer cutting

necessary

Non-destructive

Ohmic contacts

needed, critical

obsolete

Sample preparation

~ 15 min

none

Sample insertion and measurement time

~ 10 min

~ 30 s

Repeatability

~ 5%

< 1%

Evaluation of SI material

difficult

easy

Applicability

general

SI material only

µ > 1000 cm2/Vs

Acceptance

standard method

new method

=======================================================================================================

COREMA -VT

The COREMA - VT system is designed to measure resistivity at Variable Temperature above RT up to 600 K. It is primarily used to characterize SiC wafer material for verification of high temperature specifications and for detailed analytic support of material development. Data may be taken at any desired spot on wafers up to 200 mm.

System designed to evaluate resistivity at Variable Temperature

Temperature range 300 K – 673 K (RT – 400 C)

Resistivity range 1 x 10 5 – 1 x 10 12 Ωcm

High temperature capacitive probe design

Probe diameter 8 mm

Sample diameter 10 mm – 100 mm

Manual loading

Free choice of measurement position

======================================================================================================

COREMA -ER

The COREMA - ER system is designed to measure thin epitaxial layers with intermediate resistivity, grown on high resistivity substrates (Epitaxial layer, Resistivity). The most important application presently appears to be the control and analysis of GaN buffer layers on s.i. SiC or Sapphire. The procedure is not applicable to evaluate conducting layers, as used in active devices (e.g. HEMTs). Presently layers with a resistance from 1E5 Ohm to 1E11 Ohm can be measured. Consequently, for a typical layer thickness of 1 µm, the measured resistivity range is 10 Ohm*cm to 1E7 Ohm*cm. The range shifts to lower (higher) resistivity for thinner (thicker) layers. As a side condition, the substrate resistance must be large compared to the layer resistance. For a 1 µm layer this means that the substrate resistivity must exceed the layer resistivity by at least a factor of 1E4. This condition can be relaxed if the substrate resistance is known and taken into account in the analysis.

The procedure is designed to measure thin epitaxial layers with intermediate resistivity, grown on high resistivity substrates.

The most important application presently appears to be the control and analysis of GaN buffer layers on SiC or Sapphire.

The procedure is not applicable to evaluate conducting layers, as used in active devices (e.g. HEMTs).

====================================================================================================

Contacts

Saratoga Technology International

美國賽倫科技為SemiMap中國總經銷

賽倫科技上海辦事處

上海市黃浦區陸家浜路1378號萬事利大廈1102室

吳惟雨/ Caven Wu

138 17915874

Caven.wu@sar************

=================================================================================================

產品咨詢

半導體專用檢測儀設備COREMA-WT/VT/ER

賽倫科技

請?zhí)顚懩男彰?

請?zhí)顚懩碾娫挘?

請?zhí)顚懩泥]箱:*

請?zhí)顚懩膯挝?公司名稱:*

請?zhí)岢瞿膯栴}:*

您需要的服務:

發送

中國粉體網保護您的隱私權:請參閱 我們的保密政策 來了解您數據的處理以及您這方面享有的權利。 您繼續訪問我們的網站,表明您接受 我們的使用條款

半導體專用檢測儀設備COREMA-WT/VT/ER - 756
賽倫科技 的其他產品

FLOW

半導體行業專用儀器
相關搜索
關于我們
聯系我們
成為參展商

© 2025 版權所有 - 京ICP證050428號